Unwanted read-only network interface (ifupdown) The Next CEO of Stack Overfloweth0 not getting disabled after setting up br0 interfaceUsing ip addr instead of ifconfig reports “RTNETLINK answers: File exists” on Debianroute gateway proxy traffic through different interface with identical upstream gatewaysLinux Container LXC Intra Host Networking IssuesCan't enable net.ipv6.conf.eth0.autoconfUbuntu 15.10 Network Interfaces NameHow can I forward traffic across two Ethernet cards?Debian8 server : Can't resolve IP adresses or DNSHow do I set additional IP addresses on an existing interface in Debian 9?Disable Internet Access on Eth0
Why has the US not been more assertive in confronting Russia in recent years?
Is it ever safe to open a suspicious html file (e.g. email attachment)?
Several mode to write the symbol of a vector
Is there a way to save my career from absolute disaster?
Is "for causing autism in X" grammatical?
How to count occurrences of text in a file?
How did the Bene Gesserit know how to make a Kwisatz Haderach?
How do I avoid eval and parse?
How does the mv command work with external drives?
Is there a difference between "Fahrstuhl" and "Aufzug"
sp_blitzCache results Memory grants
Help understanding this unsettling image of Titan, Epimetheus, and Saturn's rings?
Why didn't Khan get resurrected in the Genesis Explosion?
Are there any unintended negative consequences to allowing PCs to gain multiple levels at once in a short milestone-XP game?
How did people program for Consoles with multiple CPUs?
Skipping indices in a product
How do I make a variable always equal to the result of some calculations?
What is "(CFMCC)" on an ILS approach chart?
Does it take more energy to get to Venus or to Mars?
How powerful is the invisibility granted by the Gloom Stalker ranger's Umbral Sight feature?
How to avoid supervisors with prejudiced views?
How do we know the LHC results are robust?
Received an invoice from my ex-employer billing me for training; how to handle?
In excess I'm lethal
Unwanted read-only network interface (ifupdown)
The Next CEO of Stack Overfloweth0 not getting disabled after setting up br0 interfaceUsing ip addr instead of ifconfig reports “RTNETLINK answers: File exists” on Debianroute gateway proxy traffic through different interface with identical upstream gatewaysLinux Container LXC Intra Host Networking IssuesCan't enable net.ipv6.conf.eth0.autoconfUbuntu 15.10 Network Interfaces NameHow can I forward traffic across two Ethernet cards?Debian8 server : Can't resolve IP adresses or DNSHow do I set additional IP addresses on an existing interface in Debian 9?Disable Internet Access on Eth0
I have an Android TV box running Armbian 5.41 (Ubuntu 16.04.5). Since I changed from kodi-standalone to MATE, I've found a network issue.
The box is connected via Ethernet, and MATE shows two interfaces: eth0 and ifupdown(eth0). I want to use eth0, because i can not set an static IP on ifupdown, because it's ready-only. Every time I restart MATE, it automatically connects to ifupdown, resulting in not having any network.
I need the static IP, because I've got Pi-Hole running on it as well, with an enabled DHCP server. The static IP of eth0 has been set in network manager. How can i remove this interface or at least setting the normal eth0 as default?
/etc/network/interfaces
# Wired adapter #1
allow-hotplug eth0
no-auto-down eth0
iface eth0 inet dhcp
#address 192.168.0.17
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# hwaddress ether # if you want to set MAC manually
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838
# Wireless adapter #1
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually. The below lines are only meant as an example how configuration could
# be done in an anachronistic way:
#
#allow-hotplug wlan0
#iface wlan0 inet dhcp
#address 192.168.0.100
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
# Disable power saving on compatible chipsets (prevents SSH/connection dropouts over WiFi)
#wireless-mode Managed
#wireless-power off
# Local loopback
auto lo
iface lo inet loopback
networking mate-desktop
New contributor
add a comment |
I have an Android TV box running Armbian 5.41 (Ubuntu 16.04.5). Since I changed from kodi-standalone to MATE, I've found a network issue.
The box is connected via Ethernet, and MATE shows two interfaces: eth0 and ifupdown(eth0). I want to use eth0, because i can not set an static IP on ifupdown, because it's ready-only. Every time I restart MATE, it automatically connects to ifupdown, resulting in not having any network.
I need the static IP, because I've got Pi-Hole running on it as well, with an enabled DHCP server. The static IP of eth0 has been set in network manager. How can i remove this interface or at least setting the normal eth0 as default?
/etc/network/interfaces
# Wired adapter #1
allow-hotplug eth0
no-auto-down eth0
iface eth0 inet dhcp
#address 192.168.0.17
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# hwaddress ether # if you want to set MAC manually
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838
# Wireless adapter #1
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually. The below lines are only meant as an example how configuration could
# be done in an anachronistic way:
#
#allow-hotplug wlan0
#iface wlan0 inet dhcp
#address 192.168.0.100
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
# Disable power saving on compatible chipsets (prevents SSH/connection dropouts over WiFi)
#wireless-mode Managed
#wireless-power off
# Local loopback
auto lo
iface lo inet loopback
networking mate-desktop
New contributor
1
ifupdown supports static IPs, for what it's worth. see for example askubuntu.com/questions/637948/set-static-ip-problem/637970
– CameronNemo
2 days ago
add a comment |
I have an Android TV box running Armbian 5.41 (Ubuntu 16.04.5). Since I changed from kodi-standalone to MATE, I've found a network issue.
The box is connected via Ethernet, and MATE shows two interfaces: eth0 and ifupdown(eth0). I want to use eth0, because i can not set an static IP on ifupdown, because it's ready-only. Every time I restart MATE, it automatically connects to ifupdown, resulting in not having any network.
I need the static IP, because I've got Pi-Hole running on it as well, with an enabled DHCP server. The static IP of eth0 has been set in network manager. How can i remove this interface or at least setting the normal eth0 as default?
/etc/network/interfaces
# Wired adapter #1
allow-hotplug eth0
no-auto-down eth0
iface eth0 inet dhcp
#address 192.168.0.17
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# hwaddress ether # if you want to set MAC manually
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838
# Wireless adapter #1
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually. The below lines are only meant as an example how configuration could
# be done in an anachronistic way:
#
#allow-hotplug wlan0
#iface wlan0 inet dhcp
#address 192.168.0.100
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
# Disable power saving on compatible chipsets (prevents SSH/connection dropouts over WiFi)
#wireless-mode Managed
#wireless-power off
# Local loopback
auto lo
iface lo inet loopback
networking mate-desktop
New contributor
I have an Android TV box running Armbian 5.41 (Ubuntu 16.04.5). Since I changed from kodi-standalone to MATE, I've found a network issue.
The box is connected via Ethernet, and MATE shows two interfaces: eth0 and ifupdown(eth0). I want to use eth0, because i can not set an static IP on ifupdown, because it's ready-only. Every time I restart MATE, it automatically connects to ifupdown, resulting in not having any network.
I need the static IP, because I've got Pi-Hole running on it as well, with an enabled DHCP server. The static IP of eth0 has been set in network manager. How can i remove this interface or at least setting the normal eth0 as default?
/etc/network/interfaces
# Wired adapter #1
allow-hotplug eth0
no-auto-down eth0
iface eth0 inet dhcp
#address 192.168.0.17
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# hwaddress ether # if you want to set MAC manually
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838
# Wireless adapter #1
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually. The below lines are only meant as an example how configuration could
# be done in an anachronistic way:
#
#allow-hotplug wlan0
#iface wlan0 inet dhcp
#address 192.168.0.100
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
# Disable power saving on compatible chipsets (prevents SSH/connection dropouts over WiFi)
#wireless-mode Managed
#wireless-power off
# Local loopback
auto lo
iface lo inet loopback
networking mate-desktop
networking mate-desktop
New contributor
New contributor
edited 2 days ago
K7AAY
865927
865927
New contributor
asked 2 days ago
AmmyAmmy
61
61
New contributor
New contributor
1
ifupdown supports static IPs, for what it's worth. see for example askubuntu.com/questions/637948/set-static-ip-problem/637970
– CameronNemo
2 days ago
add a comment |
1
ifupdown supports static IPs, for what it's worth. see for example askubuntu.com/questions/637948/set-static-ip-problem/637970
– CameronNemo
2 days ago
1
1
ifupdown supports static IPs, for what it's worth. see for example askubuntu.com/questions/637948/set-static-ip-problem/637970
– CameronNemo
2 days ago
ifupdown supports static IPs, for what it's worth. see for example askubuntu.com/questions/637948/set-static-ip-problem/637970
– CameronNemo
2 days ago
add a comment |
1 Answer
1
active
oldest
votes
From /etc/network/interfaces
:
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually.
Edit the /etc/NetworkManager/NetworkManager.conf
then change the following:
[ifupdown]
managed=true
to
[ifupdown]
managed=false
The Network-Manager will not manage the network interfaces configured under /etc/network/interfaces
then run:
sudo systemctl restart network-manager
Use the command sudo nmtui
to configure a static IP.
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "106"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Ammy is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f509082%2funwanted-read-only-network-interface-ifupdown%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
From /etc/network/interfaces
:
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually.
Edit the /etc/NetworkManager/NetworkManager.conf
then change the following:
[ifupdown]
managed=true
to
[ifupdown]
managed=false
The Network-Manager will not manage the network interfaces configured under /etc/network/interfaces
then run:
sudo systemctl restart network-manager
Use the command sudo nmtui
to configure a static IP.
add a comment |
From /etc/network/interfaces
:
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually.
Edit the /etc/NetworkManager/NetworkManager.conf
then change the following:
[ifupdown]
managed=true
to
[ifupdown]
managed=false
The Network-Manager will not manage the network interfaces configured under /etc/network/interfaces
then run:
sudo systemctl restart network-manager
Use the command sudo nmtui
to configure a static IP.
add a comment |
From /etc/network/interfaces
:
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually.
Edit the /etc/NetworkManager/NetworkManager.conf
then change the following:
[ifupdown]
managed=true
to
[ifupdown]
managed=false
The Network-Manager will not manage the network interfaces configured under /etc/network/interfaces
then run:
sudo systemctl restart network-manager
Use the command sudo nmtui
to configure a static IP.
From /etc/network/interfaces
:
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually.
Edit the /etc/NetworkManager/NetworkManager.conf
then change the following:
[ifupdown]
managed=true
to
[ifupdown]
managed=false
The Network-Manager will not manage the network interfaces configured under /etc/network/interfaces
then run:
sudo systemctl restart network-manager
Use the command sudo nmtui
to configure a static IP.
answered 2 days ago
GAD3RGAD3R
27.7k1858114
27.7k1858114
add a comment |
add a comment |
Ammy is a new contributor. Be nice, and check out our Code of Conduct.
Ammy is a new contributor. Be nice, and check out our Code of Conduct.
Ammy is a new contributor. Be nice, and check out our Code of Conduct.
Ammy is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f509082%2funwanted-read-only-network-interface-ifupdown%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
ifupdown supports static IPs, for what it's worth. see for example askubuntu.com/questions/637948/set-static-ip-problem/637970
– CameronNemo
2 days ago