When is it necessary to paint a wooden fascia (barge) board?Is caulk a good temporary fix for a gash in fascia board?how to attach gutter when there is an additional trim board on fascia?How can I temporarily fix rotted soffit, fascia, and vented panels?Tips for nailing aluminum fascia coverRetrofitting drip edges with a wooden spacer?Replacing fascia board: what kind of contractor?Good alternative to wood fascia trimIs this Gutter install right?Cut steel fascia board cover lengthwise?How to Install Gutters Under This Roof
Can somebody explain Brexit in a few child-proof sentences?
A social experiment. What is the worst that can happen?
How to align and center standalone amsmath equations?
Customize circled numbers
Is possible to search in vim history?
Diode in opposite direction?
Is it possible to have a strip of cold climate in the middle of a planet?
Why does Async/Await work properly when the loop is inside the async function and not the other way around?
Bob has never been a M before
Can I sign legal documents with a smiley face?
Can we have a perfect cadence in a minor key?
Create all possible words using a set or letters
How do I extrude a face to a single vertex
Why is Arduino resetting while driving motors?
Could solar power be utilized and substitute coal in the 19th Century
Why did the EU agree to delay the Brexit deadline?
Is it possible to use .desktop files to open local pdf files on specific pages with a browser?
Are lightweight LN wallets vulnerable to transaction withholding?
What major Native American tribes were around Santa Fe during the late 1850s?
How can Trident be so inexpensive? Will it orbit Triton or just do a (slow) flyby?
How do I repair my stair bannister?
How to color a curve
On a tidally locked planet, would time be quantized?
Why did the HMS Bounty go back to a time when whales are already rare?
When is it necessary to paint a wooden fascia (barge) board?
Is caulk a good temporary fix for a gash in fascia board?how to attach gutter when there is an additional trim board on fascia?How can I temporarily fix rotted soffit, fascia, and vented panels?Tips for nailing aluminum fascia coverRetrofitting drip edges with a wooden spacer?Replacing fascia board: what kind of contractor?Good alternative to wood fascia trimIs this Gutter install right?Cut steel fascia board cover lengthwise?How to Install Gutters Under This Roof
Context: a Florida roof and gutter is to be replaced, however the fascia wood was rotten and replaced. The plan is to be covered by aluminum fascia and has a drip edge.
- When does it make sense to paint the wood boards?
- Does it make sense to paint if Aluminum fascia is to be nailed to the board?
The goal is to have the building ready for the gutter craftsman.
roofing gutters fascia
asked yesterday
gatorbackgatorback
6872721
add a comment |
Context: a Florida roof and gutter is to be replaced, however the fascia wood was rotten and replaced. The plan is to be covered by aluminum fascia and has a drip edge.
- When does it make sense to paint the wood boards?
- Does it make sense to paint if Aluminum fascia is to be nailed to the board?
The goal is to have the building ready for the gutter craftsman.
roofing gutters fascia
asked yesterday
gatorbackgatorback
6872721
add a comment |
Context: a Florida roof and gutter is to be replaced, however the fascia wood was rotten and replaced. The plan is to be covered by aluminum fascia and has a drip edge.
- When does it make sense to paint the wood boards?
- Does it make sense to paint if Aluminum fascia is to be nailed to the board?
The goal is to have the building ready for the gutter craftsman.
roofing gutters fascia
asked yesterday
gatorbackgatorback
6872721
Context: a Florida roof and gutter is to be replaced, however the fascia wood was rotten and replaced. The plan is to be covered by aluminum fascia and has a drip edge.
- When does it make sense to paint the wood boards?
- Does it make sense to paint if Aluminum fascia is to be nailed to the board?
The goal is to have the building ready for the gutter craftsman.
roofing gutters fascia
roofing gutters fascia
asked yesterday
gatorbackgatorback
6872721
asked yesterday
gatorbackgatorback
6872721
edited yesterday
gatorback
asked yesterday
gatorbackgatorback
6872721
asked yesterday
gatorbackgatorback
6872721
asked yesterday
gatorbackgatorback
6872721
6872721
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Exposed wood must always be sealed in some fashion unless it's chemically treated or of a species that's rot-resistant (cedar, teak, etc.). Even then it tends to preserve the aesthetics of wood to paint, oil, or varnish it.
Metal fascia is commonly installed right over "subfascia" (raw SPF 2x6 lumber).
If everything is installed correctly it should never see water.
answered yesterday
isherwoodisherwood
50.2k456127
Thanks isherwood. Is it possible to determine (visual inspection) if the wood is chemically treated? Ideally it would be possible to look at the photo and determine if it has been treated. I think that you are indicating that if the wood is treated, that the aluminum fascia is nailed to the wood and is ready for the gutter crew?
– gatorback
yesterday
1
It'll be unnaturally green or brown, and it'll be wet and heavy when you buy it.
– isherwood
yesterday
@isherwood I have no idea about the US timber industry, but in the UK pressure-treated timber is certainly not "wet and heavy". It has the same moisture content as untreated timber when sold. Lower quality dipped timber may have more moisture, but the cheaper initial price is usually less cost-effective because its lifetime is shorter.
– alephzero
yesterday
@alephzero, are you saying that the lumber manufacturers dry the lumber again after it's pressure treated in vats of liquid?
– isherwood
yesterday
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "73"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f160450%2fwhen-is-it-necessary-to-paint-a-wooden-fascia-barge-board%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Exposed wood must always be sealed in some fashion unless it's chemically treated or of a species that's rot-resistant (cedar, teak, etc.). Even then it tends to preserve the aesthetics of wood to paint, oil, or varnish it.
Metal fascia is commonly installed right over "subfascia" (raw SPF 2x6 lumber).
If everything is installed correctly it should never see water.
answered yesterday
isherwoodisherwood
50.2k456127
Thanks isherwood. Is it possible to determine (visual inspection) if the wood is chemically treated? Ideally it would be possible to look at the photo and determine if it has been treated. I think that you are indicating that if the wood is treated, that the aluminum fascia is nailed to the wood and is ready for the gutter crew?
– gatorback
yesterday
1
It'll be unnaturally green or brown, and it'll be wet and heavy when you buy it.
– isherwood
yesterday
@isherwood I have no idea about the US timber industry, but in the UK pressure-treated timber is certainly not "wet and heavy". It has the same moisture content as untreated timber when sold. Lower quality dipped timber may have more moisture, but the cheaper initial price is usually less cost-effective because its lifetime is shorter.
– alephzero
yesterday
@alephzero, are you saying that the lumber manufacturers dry the lumber again after it's pressure treated in vats of liquid?
– isherwood
yesterday
add a comment |
Exposed wood must always be sealed in some fashion unless it's chemically treated or of a species that's rot-resistant (cedar, teak, etc.). Even then it tends to preserve the aesthetics of wood to paint, oil, or varnish it.
Metal fascia is commonly installed right over "subfascia" (raw SPF 2x6 lumber).
If everything is installed correctly it should never see water.
answered yesterday
isherwoodisherwood
50.2k456127
Thanks isherwood. Is it possible to determine (visual inspection) if the wood is chemically treated? Ideally it would be possible to look at the photo and determine if it has been treated. I think that you are indicating that if the wood is treated, that the aluminum fascia is nailed to the wood and is ready for the gutter crew?
– gatorback
yesterday
1
It'll be unnaturally green or brown, and it'll be wet and heavy when you buy it.
– isherwood
yesterday
@isherwood I have no idea about the US timber industry, but in the UK pressure-treated timber is certainly not "wet and heavy". It has the same moisture content as untreated timber when sold. Lower quality dipped timber may have more moisture, but the cheaper initial price is usually less cost-effective because its lifetime is shorter.
– alephzero
yesterday
@alephzero, are you saying that the lumber manufacturers dry the lumber again after it's pressure treated in vats of liquid?
– isherwood
yesterday
add a comment |
Exposed wood must always be sealed in some fashion unless it's chemically treated or of a species that's rot-resistant (cedar, teak, etc.). Even then it tends to preserve the aesthetics of wood to paint, oil, or varnish it.
Metal fascia is commonly installed right over "subfascia" (raw SPF 2x6 lumber).
If everything is installed correctly it should never see water.
answered yesterday
isherwoodisherwood
50.2k456127
Exposed wood must always be sealed in some fashion unless it's chemically treated or of a species that's rot-resistant (cedar, teak, etc.). Even then it tends to preserve the aesthetics of wood to paint, oil, or varnish it.
Metal fascia is commonly installed right over "subfascia" (raw SPF 2x6 lumber).
If everything is installed correctly it should never see water.
answered yesterday
isherwoodisherwood
50.2k456127
answered yesterday
isherwoodisherwood
50.2k456127
answered yesterday
isherwoodisherwood
50.2k456127
answered yesterday
isherwoodisherwood
50.2k456127
50.2k456127
Thanks isherwood. Is it possible to determine (visual inspection) if the wood is chemically treated? Ideally it would be possible to look at the photo and determine if it has been treated. I think that you are indicating that if the wood is treated, that the aluminum fascia is nailed to the wood and is ready for the gutter crew?
– gatorback
yesterday
1
It'll be unnaturally green or brown, and it'll be wet and heavy when you buy it.
– isherwood
yesterday
@isherwood I have no idea about the US timber industry, but in the UK pressure-treated timber is certainly not "wet and heavy". It has the same moisture content as untreated timber when sold. Lower quality dipped timber may have more moisture, but the cheaper initial price is usually less cost-effective because its lifetime is shorter.
– alephzero
yesterday
@alephzero, are you saying that the lumber manufacturers dry the lumber again after it's pressure treated in vats of liquid?
– isherwood
yesterday
add a comment |
Thanks isherwood. Is it possible to determine (visual inspection) if the wood is chemically treated? Ideally it would be possible to look at the photo and determine if it has been treated. I think that you are indicating that if the wood is treated, that the aluminum fascia is nailed to the wood and is ready for the gutter crew?
– gatorback
yesterday
1
It'll be unnaturally green or brown, and it'll be wet and heavy when you buy it.
– isherwood
yesterday
@isherwood I have no idea about the US timber industry, but in the UK pressure-treated timber is certainly not "wet and heavy". It has the same moisture content as untreated timber when sold. Lower quality dipped timber may have more moisture, but the cheaper initial price is usually less cost-effective because its lifetime is shorter.
– alephzero
yesterday
@alephzero, are you saying that the lumber manufacturers dry the lumber again after it's pressure treated in vats of liquid?
– isherwood
yesterday
Thanks isherwood. Is it possible to determine (visual inspection) if the wood is chemically treated? Ideally it would be possible to look at the photo and determine if it has been treated. I think that you are indicating that if the wood is treated, that the aluminum fascia is nailed to the wood and is ready for the gutter crew?
– gatorback
yesterday
Thanks isherwood. Is it possible to determine (visual inspection) if the wood is chemically treated? Ideally it would be possible to look at the photo and determine if it has been treated. I think that you are indicating that if the wood is treated, that the aluminum fascia is nailed to the wood and is ready for the gutter crew?
– gatorback
yesterday
1
1
It'll be unnaturally green or brown, and it'll be wet and heavy when you buy it.
– isherwood
yesterday
It'll be unnaturally green or brown, and it'll be wet and heavy when you buy it.
– isherwood
yesterday
@isherwood I have no idea about the US timber industry, but in the UK pressure-treated timber is certainly not "wet and heavy". It has the same moisture content as untreated timber when sold. Lower quality dipped timber may have more moisture, but the cheaper initial price is usually less cost-effective because its lifetime is shorter.
– alephzero
yesterday
@isherwood I have no idea about the US timber industry, but in the UK pressure-treated timber is certainly not "wet and heavy". It has the same moisture content as untreated timber when sold. Lower quality dipped timber may have more moisture, but the cheaper initial price is usually less cost-effective because its lifetime is shorter.
– alephzero
yesterday
@alephzero, are you saying that the lumber manufacturers dry the lumber again after it's pressure treated in vats of liquid?
– isherwood
yesterday
@alephzero, are you saying that the lumber manufacturers dry the lumber again after it's pressure treated in vats of liquid?
– isherwood
yesterday
add a comment |
Thanks for contributing an answer to Home Improvement Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f160450%2fwhen-is-it-necessary-to-paint-a-wooden-fascia-barge-board%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
