What to do with post with dry rot? Planned maintenance scheduled April 23, 2019 at 00:00UTC (8:00pm US/Eastern) Announcing the arrival of Valued Associate #679: Cesar Manara Unicorn Meta Zoo #1: Why another podcast?Replacing rot in wooden porch columnBest way to dry out wet, painted woodPrevent dry rot from spreadingIf it is important to humidify the air in winter for one's health, how then do you prevent condensation from forming on the inside of windows?Does siding rot propagate upwards?Repairing rot in window framingShould I Let my PT Fence Dry Before InstallingWhat is involved with replacing floor joistsReplacing Rotted Deck FootingsDry Rot (?) in Exterior Trim, patch or replace?
How could we fake a moon landing now?
Is it a good idea to use CNN to classify 1D signal?
What are the diatonic extended chords of C major?
What would you call this weird metallic apparatus that allows you to lift people?
Why do we bend a book to keep it straight?
Is grep documentation about ignoring case wrong, since it doesn't ignore case in filenames?
Why do early math courses focus on the cross sections of a cone and not on other 3D objects?
What does it mean that physics no longer uses mechanical models to describe phenomena?
Hangman Game with C++
Most bit efficient text communication method?
What is a fractional matching?
How does the math work when buying airline miles?
What was the first language to use conditional keywords?
Disembodied hand growing fangs
Do wooden building fires get hotter than 600°C?
Selecting user stories during sprint planning
AppleTVs create a chatty alternate WiFi network
Why wasn't DOSKEY integrated with COMMAND.COM?
How come Sam didn't become Lord of Horn Hill?
Why is it faster to reheat something than it is to cook it?
Using audio cues to encourage good posture
Why does it sometimes sound good to play a grace note as a lead in to a note in a melody?
What is this clumpy 20-30cm high yellow-flowered plant?
Converted a Scalar function to a TVF function for parallel execution-Still running in Serial mode
What to do with post with dry rot?
Planned maintenance scheduled April 23, 2019 at 00:00UTC (8:00pm US/Eastern)
Announcing the arrival of Valued Associate #679: Cesar Manara
Unicorn Meta Zoo #1: Why another podcast?Replacing rot in wooden porch columnBest way to dry out wet, painted woodPrevent dry rot from spreadingIf it is important to humidify the air in winter for one's health, how then do you prevent condensation from forming on the inside of windows?Does siding rot propagate upwards?Repairing rot in window framingShould I Let my PT Fence Dry Before InstallingWhat is involved with replacing floor joistsReplacing Rotted Deck FootingsDry Rot (?) in Exterior Trim, patch or replace?
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty margin-bottom:0;
We’re getting ready to paint and I was checking around my porch. There are three columns that support the roof over my porch. One of them had a decorative cross member that was dislodged because of dry rot at the location where the cross member was nailed to the column. I saw some dry rot there and started to excavate the rot. 
Here are some pictures of the bottom of the post. It has a small amount of concrete around the posts. The post goes into the concrete an inch or two deep.
What should I do about this. I think that since there are two others columns supporting the porch roof this one with the rotted base didn’t really affect the general load bearing aspect.
How should I fix this? Just add a lot of bondo, or wood filler, et.
Take the post out and put in a new one? (I don’t want to do this bc I would need to take out all he decorative cross beams.
Cut out the old wood base and graft on a nicer/new to replace the big sections that we cut out?
dry-rot
asked Apr 14 at 6:13
milesmeowmilesmeow
2,254124778
add a comment |
We’re getting ready to paint and I was checking around my porch. There are three columns that support the roof over my porch. One of them had a decorative cross member that was dislodged because of dry rot at the location where the cross member was nailed to the column. I saw some dry rot there and started to excavate the rot.
Here are some pictures of the bottom of the post. It has a small amount of concrete around the posts. The post goes into the concrete an inch or two deep.
What should I do about this. I think that since there are two others columns supporting the porch roof this one with the rotted base didn’t really affect the general load bearing aspect.
How should I fix this? Just add a lot of bondo, or wood filler, et.
Take the post out and put in a new one? (I don’t want to do this bc I would need to take out all he decorative cross beams.
Cut out the old wood base and graft on a nicer/new to replace the big sections that we cut out?
dry-rot
asked Apr 14 at 6:13
milesmeowmilesmeow
2,254124778
2
Hopefully you have checked the other posts (or will) for similar problems...
– Jimmy Fix-it
Apr 14 at 14:10
add a comment |
We’re getting ready to paint and I was checking around my porch. There are three columns that support the roof over my porch. One of them had a decorative cross member that was dislodged because of dry rot at the location where the cross member was nailed to the column. I saw some dry rot there and started to excavate the rot.
Here are some pictures of the bottom of the post. It has a small amount of concrete around the posts. The post goes into the concrete an inch or two deep.
What should I do about this. I think that since there are two others columns supporting the porch roof this one with the rotted base didn’t really affect the general load bearing aspect.
How should I fix this? Just add a lot of bondo, or wood filler, et.
Take the post out and put in a new one? (I don’t want to do this bc I would need to take out all he decorative cross beams.
Cut out the old wood base and graft on a nicer/new to replace the big sections that we cut out?
dry-rot
asked Apr 14 at 6:13
milesmeowmilesmeow
2,254124778
We’re getting ready to paint and I was checking around my porch. There are three columns that support the roof over my porch. One of them had a decorative cross member that was dislodged because of dry rot at the location where the cross member was nailed to the column. I saw some dry rot there and started to excavate the rot.
Here are some pictures of the bottom of the post. It has a small amount of concrete around the posts. The post goes into the concrete an inch or two deep.
What should I do about this. I think that since there are two others columns supporting the porch roof this one with the rotted base didn’t really affect the general load bearing aspect.
How should I fix this? Just add a lot of bondo, or wood filler, et.
Take the post out and put in a new one? (I don’t want to do this bc I would need to take out all he decorative cross beams.
Cut out the old wood base and graft on a nicer/new to replace the big sections that we cut out?
dry-rot
dry-rot
asked Apr 14 at 6:13
milesmeowmilesmeow
2,254124778
asked Apr 14 at 6:13
milesmeowmilesmeow
2,254124778
edited Apr 16 at 4:06
milesmeow
asked Apr 14 at 6:13
milesmeowmilesmeow
2,254124778
asked Apr 14 at 6:13
milesmeowmilesmeow
2,254124778
asked Apr 14 at 6:13
milesmeowmilesmeow
2,254124778
2,254124778
2
Hopefully you have checked the other posts (or will) for similar problems...
– Jimmy Fix-it
Apr 14 at 14:10
add a comment |
2
Hopefully you have checked the other posts (or will) for similar problems...
– Jimmy Fix-it
Apr 14 at 14:10
2
2
Hopefully you have checked the other posts (or will) for similar problems...
– Jimmy Fix-it
Apr 14 at 14:10
Hopefully you have checked the other posts (or will) for similar problems...
– Jimmy Fix-it
Apr 14 at 14:10
add a comment |
3 Answers
3
active
oldest
votes
Are you sure about the load bearing? It may sag if you are not careful...
Anyway either replace the post completely or make a replacement bottom section and support the rest of the structure - acrow jacks work well for this type of thing.
This is one example of a supplier of acrow jacks - many others... :
https://www.scaffolding-direct.co.uk/new-size-3-acrow-prop-2-4m-4m/
answered Apr 14 at 7:01
Solar MikeSolar Mike
1,363210
Do you recommend bottle jacks(hydraulic) or screw jacks? While researching people say the hydraulic can leak and lose tension.
– milesmeow
Apr 15 at 16:30
add a comment |
The post should really be replaced, at the least add a new bottom utilizing a structural splice
The issue with the structural splice, the new post section will not be the same dimension as the original, and will be quite noticeable. With a new post, it still may not be the same, but it will not be a noticeable as the splice.
Another way to do it is to either have a post custom cut to the size of the original.
Just a mention, it is wise to inspect the other posts at the very bottom. The post pictured since it is in the concrete a bit, the others will be too? The concern is the concrete or actually a course of brick pavers added after the posts were set, made a pocket to hold water which allowed the wood to rot most likely sooner rather than later.
answered Apr 14 at 15:39
JackJack
20.7k11336
Yes the other posts are in concrete too. They don’t seem to have any dry rot. What is the best way to check without damaging the posts. Just drill a hole?
– milesmeow
Apr 14 at 15:44
The screwdriver you were using would work on the worst spots by trying to insert it a the bottom were the post meets the concrete. An ice pick, scratch awl or another screwdriver that has a smaller blade will work too. If it sinks in easy, those posts would need repair as well. Drilling a hole would go in easy in any case, since it displaces the wood. It would give an idea still. The methods I mention above would need to separate the wood, which should be much more difficult to do.
– Jack
Apr 14 at 15:50
1
What about tapping for sound? If it sounds more hollow or less dense at the base that would be the first indication and then I would use an awl or ice pick.
– milesmeow
Apr 14 at 15:52
1
Before you install the replacement piece, place the bottom end in a bucket with about 2 inches of the best wood preservative you can find (alas, the good ones have been pulled from the market) and let it soak for several hours.
– Hot Licks
Apr 14 at 19:28
1
@Criggie, Drilling a drain hole may help, but not that much. Concrete acts like a sponge and will soak up any water it comes in contact with. It will still allow moisture to be in close contact with the post. The idea of setting the post on a pedestal is a good one, but not of concrete. There are metal pedestals that are made to fit under posts to elevate it above the concrete. This allows some air to get to the bottom to help the post bottom to dry out
– Jack
Apr 15 at 14:02
|
show 7 more comments
Take as much of the rotten bits out.
Soak/spray 2 or 3 times the inside with an epoxy slow hardening paint,
let it harden pref a few days,
fill up the hole with a slow polyester selfmixing anchoring cartridge and similar wood
If you want to see the wood and not polyester, use the same wood 45°routed on the front.
Epoxy spray the parts that will be in contact with the resin.
Covering the wood with epoxy spray is because the polyester resin will be soaked up into the wood leaving the filler not to spec.
I use:
http://www.ramset.com.au/Resources/Website/Product/Detail/img714p31.jpg
Make sure everything fits before mucking around with the poly
In the olden days i used old drained motor oil. 30 years on, the cheap pine still looks ugly and smelly but in good shape in the Netherlands
answered Apr 14 at 23:58
PeterPeter
111
New contributor
Peter is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "73"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f162061%2fwhat-to-do-with-post-with-dry-rot%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
Are you sure about the load bearing? It may sag if you are not careful...
Anyway either replace the post completely or make a replacement bottom section and support the rest of the structure - acrow jacks work well for this type of thing.
This is one example of a supplier of acrow jacks - many others... :
https://www.scaffolding-direct.co.uk/new-size-3-acrow-prop-2-4m-4m/
answered Apr 14 at 7:01
Solar MikeSolar Mike
1,363210
Do you recommend bottle jacks(hydraulic) or screw jacks? While researching people say the hydraulic can leak and lose tension.
– milesmeow
Apr 15 at 16:30
add a comment |
Are you sure about the load bearing? It may sag if you are not careful...
Anyway either replace the post completely or make a replacement bottom section and support the rest of the structure - acrow jacks work well for this type of thing.
This is one example of a supplier of acrow jacks - many others... :
https://www.scaffolding-direct.co.uk/new-size-3-acrow-prop-2-4m-4m/
answered Apr 14 at 7:01
Solar MikeSolar Mike
1,363210
Do you recommend bottle jacks(hydraulic) or screw jacks? While researching people say the hydraulic can leak and lose tension.
– milesmeow
Apr 15 at 16:30
add a comment |
Are you sure about the load bearing? It may sag if you are not careful...
Anyway either replace the post completely or make a replacement bottom section and support the rest of the structure - acrow jacks work well for this type of thing.
This is one example of a supplier of acrow jacks - many others... :
https://www.scaffolding-direct.co.uk/new-size-3-acrow-prop-2-4m-4m/
answered Apr 14 at 7:01
Solar MikeSolar Mike
1,363210
Are you sure about the load bearing? It may sag if you are not careful...
Anyway either replace the post completely or make a replacement bottom section and support the rest of the structure - acrow jacks work well for this type of thing.
This is one example of a supplier of acrow jacks - many others... :
https://www.scaffolding-direct.co.uk/new-size-3-acrow-prop-2-4m-4m/
answered Apr 14 at 7:01
Solar MikeSolar Mike
1,363210
edited Apr 14 at 8:44
answered Apr 14 at 7:01
Solar MikeSolar Mike
1,363210
answered Apr 14 at 7:01
Solar MikeSolar Mike
1,363210
answered Apr 14 at 7:01
Solar MikeSolar Mike
1,363210
1,363210
Do you recommend bottle jacks(hydraulic) or screw jacks? While researching people say the hydraulic can leak and lose tension.
– milesmeow
Apr 15 at 16:30
add a comment |
Do you recommend bottle jacks(hydraulic) or screw jacks? While researching people say the hydraulic can leak and lose tension.
– milesmeow
Apr 15 at 16:30
Do you recommend bottle jacks(hydraulic) or screw jacks? While researching people say the hydraulic can leak and lose tension.
– milesmeow
Apr 15 at 16:30
Do you recommend bottle jacks(hydraulic) or screw jacks? While researching people say the hydraulic can leak and lose tension.
– milesmeow
Apr 15 at 16:30
add a comment |
The post should really be replaced, at the least add a new bottom utilizing a structural splice
The issue with the structural splice, the new post section will not be the same dimension as the original, and will be quite noticeable. With a new post, it still may not be the same, but it will not be a noticeable as the splice.
Another way to do it is to either have a post custom cut to the size of the original.
Just a mention, it is wise to inspect the other posts at the very bottom. The post pictured since it is in the concrete a bit, the others will be too? The concern is the concrete or actually a course of brick pavers added after the posts were set, made a pocket to hold water which allowed the wood to rot most likely sooner rather than later.
answered Apr 14 at 15:39
JackJack
20.7k11336
Yes the other posts are in concrete too. They don’t seem to have any dry rot. What is the best way to check without damaging the posts. Just drill a hole?
– milesmeow
Apr 14 at 15:44
The screwdriver you were using would work on the worst spots by trying to insert it a the bottom were the post meets the concrete. An ice pick, scratch awl or another screwdriver that has a smaller blade will work too. If it sinks in easy, those posts would need repair as well. Drilling a hole would go in easy in any case, since it displaces the wood. It would give an idea still. The methods I mention above would need to separate the wood, which should be much more difficult to do.
– Jack
Apr 14 at 15:50
1
What about tapping for sound? If it sounds more hollow or less dense at the base that would be the first indication and then I would use an awl or ice pick.
– milesmeow
Apr 14 at 15:52
1
Before you install the replacement piece, place the bottom end in a bucket with about 2 inches of the best wood preservative you can find (alas, the good ones have been pulled from the market) and let it soak for several hours.
– Hot Licks
Apr 14 at 19:28
1
@Criggie, Drilling a drain hole may help, but not that much. Concrete acts like a sponge and will soak up any water it comes in contact with. It will still allow moisture to be in close contact with the post. The idea of setting the post on a pedestal is a good one, but not of concrete. There are metal pedestals that are made to fit under posts to elevate it above the concrete. This allows some air to get to the bottom to help the post bottom to dry out
– Jack
Apr 15 at 14:02
|
show 7 more comments
The post should really be replaced, at the least add a new bottom utilizing a structural splice
The issue with the structural splice, the new post section will not be the same dimension as the original, and will be quite noticeable. With a new post, it still may not be the same, but it will not be a noticeable as the splice.
Another way to do it is to either have a post custom cut to the size of the original.
Just a mention, it is wise to inspect the other posts at the very bottom. The post pictured since it is in the concrete a bit, the others will be too? The concern is the concrete or actually a course of brick pavers added after the posts were set, made a pocket to hold water which allowed the wood to rot most likely sooner rather than later.
answered Apr 14 at 15:39
JackJack
20.7k11336
Yes the other posts are in concrete too. They don’t seem to have any dry rot. What is the best way to check without damaging the posts. Just drill a hole?
– milesmeow
Apr 14 at 15:44
The screwdriver you were using would work on the worst spots by trying to insert it a the bottom were the post meets the concrete. An ice pick, scratch awl or another screwdriver that has a smaller blade will work too. If it sinks in easy, those posts would need repair as well. Drilling a hole would go in easy in any case, since it displaces the wood. It would give an idea still. The methods I mention above would need to separate the wood, which should be much more difficult to do.
– Jack
Apr 14 at 15:50
1
What about tapping for sound? If it sounds more hollow or less dense at the base that would be the first indication and then I would use an awl or ice pick.
– milesmeow
Apr 14 at 15:52
1
Before you install the replacement piece, place the bottom end in a bucket with about 2 inches of the best wood preservative you can find (alas, the good ones have been pulled from the market) and let it soak for several hours.
– Hot Licks
Apr 14 at 19:28
1
@Criggie, Drilling a drain hole may help, but not that much. Concrete acts like a sponge and will soak up any water it comes in contact with. It will still allow moisture to be in close contact with the post. The idea of setting the post on a pedestal is a good one, but not of concrete. There are metal pedestals that are made to fit under posts to elevate it above the concrete. This allows some air to get to the bottom to help the post bottom to dry out
– Jack
Apr 15 at 14:02
|
show 7 more comments
The post should really be replaced, at the least add a new bottom utilizing a structural splice
The issue with the structural splice, the new post section will not be the same dimension as the original, and will be quite noticeable. With a new post, it still may not be the same, but it will not be a noticeable as the splice.
Another way to do it is to either have a post custom cut to the size of the original.
Just a mention, it is wise to inspect the other posts at the very bottom. The post pictured since it is in the concrete a bit, the others will be too? The concern is the concrete or actually a course of brick pavers added after the posts were set, made a pocket to hold water which allowed the wood to rot most likely sooner rather than later.
answered Apr 14 at 15:39
JackJack
20.7k11336
The post should really be replaced, at the least add a new bottom utilizing a structural splice
The issue with the structural splice, the new post section will not be the same dimension as the original, and will be quite noticeable. With a new post, it still may not be the same, but it will not be a noticeable as the splice.
Another way to do it is to either have a post custom cut to the size of the original.
Just a mention, it is wise to inspect the other posts at the very bottom. The post pictured since it is in the concrete a bit, the others will be too? The concern is the concrete or actually a course of brick pavers added after the posts were set, made a pocket to hold water which allowed the wood to rot most likely sooner rather than later.
answered Apr 14 at 15:39
JackJack
20.7k11336
answered Apr 14 at 15:39
JackJack
20.7k11336
answered Apr 14 at 15:39
JackJack
20.7k11336
answered Apr 14 at 15:39
JackJack
20.7k11336
20.7k11336
Yes the other posts are in concrete too. They don’t seem to have any dry rot. What is the best way to check without damaging the posts. Just drill a hole?
– milesmeow
Apr 14 at 15:44
The screwdriver you were using would work on the worst spots by trying to insert it a the bottom were the post meets the concrete. An ice pick, scratch awl or another screwdriver that has a smaller blade will work too. If it sinks in easy, those posts would need repair as well. Drilling a hole would go in easy in any case, since it displaces the wood. It would give an idea still. The methods I mention above would need to separate the wood, which should be much more difficult to do.
– Jack
Apr 14 at 15:50
1
What about tapping for sound? If it sounds more hollow or less dense at the base that would be the first indication and then I would use an awl or ice pick.
– milesmeow
Apr 14 at 15:52
1
Before you install the replacement piece, place the bottom end in a bucket with about 2 inches of the best wood preservative you can find (alas, the good ones have been pulled from the market) and let it soak for several hours.
– Hot Licks
Apr 14 at 19:28
1
@Criggie, Drilling a drain hole may help, but not that much. Concrete acts like a sponge and will soak up any water it comes in contact with. It will still allow moisture to be in close contact with the post. The idea of setting the post on a pedestal is a good one, but not of concrete. There are metal pedestals that are made to fit under posts to elevate it above the concrete. This allows some air to get to the bottom to help the post bottom to dry out
– Jack
Apr 15 at 14:02
|
show 7 more comments
Yes the other posts are in concrete too. They don’t seem to have any dry rot. What is the best way to check without damaging the posts. Just drill a hole?
– milesmeow
Apr 14 at 15:44
The screwdriver you were using would work on the worst spots by trying to insert it a the bottom were the post meets the concrete. An ice pick, scratch awl or another screwdriver that has a smaller blade will work too. If it sinks in easy, those posts would need repair as well. Drilling a hole would go in easy in any case, since it displaces the wood. It would give an idea still. The methods I mention above would need to separate the wood, which should be much more difficult to do.
– Jack
Apr 14 at 15:50
1
What about tapping for sound? If it sounds more hollow or less dense at the base that would be the first indication and then I would use an awl or ice pick.
– milesmeow
Apr 14 at 15:52
1
Before you install the replacement piece, place the bottom end in a bucket with about 2 inches of the best wood preservative you can find (alas, the good ones have been pulled from the market) and let it soak for several hours.
– Hot Licks
Apr 14 at 19:28
1
@Criggie, Drilling a drain hole may help, but not that much. Concrete acts like a sponge and will soak up any water it comes in contact with. It will still allow moisture to be in close contact with the post. The idea of setting the post on a pedestal is a good one, but not of concrete. There are metal pedestals that are made to fit under posts to elevate it above the concrete. This allows some air to get to the bottom to help the post bottom to dry out
– Jack
Apr 15 at 14:02
Yes the other posts are in concrete too. They don’t seem to have any dry rot. What is the best way to check without damaging the posts. Just drill a hole?
– milesmeow
Apr 14 at 15:44
Yes the other posts are in concrete too. They don’t seem to have any dry rot. What is the best way to check without damaging the posts. Just drill a hole?
– milesmeow
Apr 14 at 15:44
The screwdriver you were using would work on the worst spots by trying to insert it a the bottom were the post meets the concrete. An ice pick, scratch awl or another screwdriver that has a smaller blade will work too. If it sinks in easy, those posts would need repair as well. Drilling a hole would go in easy in any case, since it displaces the wood. It would give an idea still. The methods I mention above would need to separate the wood, which should be much more difficult to do.
– Jack
Apr 14 at 15:50
The screwdriver you were using would work on the worst spots by trying to insert it a the bottom were the post meets the concrete. An ice pick, scratch awl or another screwdriver that has a smaller blade will work too. If it sinks in easy, those posts would need repair as well. Drilling a hole would go in easy in any case, since it displaces the wood. It would give an idea still. The methods I mention above would need to separate the wood, which should be much more difficult to do.
– Jack
Apr 14 at 15:50
1
1
What about tapping for sound? If it sounds more hollow or less dense at the base that would be the first indication and then I would use an awl or ice pick.
– milesmeow
Apr 14 at 15:52
What about tapping for sound? If it sounds more hollow or less dense at the base that would be the first indication and then I would use an awl or ice pick.
– milesmeow
Apr 14 at 15:52
1
1
Before you install the replacement piece, place the bottom end in a bucket with about 2 inches of the best wood preservative you can find (alas, the good ones have been pulled from the market) and let it soak for several hours.
– Hot Licks
Apr 14 at 19:28
Before you install the replacement piece, place the bottom end in a bucket with about 2 inches of the best wood preservative you can find (alas, the good ones have been pulled from the market) and let it soak for several hours.
– Hot Licks
Apr 14 at 19:28
1
1
@Criggie, Drilling a drain hole may help, but not that much. Concrete acts like a sponge and will soak up any water it comes in contact with. It will still allow moisture to be in close contact with the post. The idea of setting the post on a pedestal is a good one, but not of concrete. There are metal pedestals that are made to fit under posts to elevate it above the concrete. This allows some air to get to the bottom to help the post bottom to dry out
– Jack
Apr 15 at 14:02
@Criggie, Drilling a drain hole may help, but not that much. Concrete acts like a sponge and will soak up any water it comes in contact with. It will still allow moisture to be in close contact with the post. The idea of setting the post on a pedestal is a good one, but not of concrete. There are metal pedestals that are made to fit under posts to elevate it above the concrete. This allows some air to get to the bottom to help the post bottom to dry out
– Jack
Apr 15 at 14:02
|
show 7 more comments
Take as much of the rotten bits out.
Soak/spray 2 or 3 times the inside with an epoxy slow hardening paint,
let it harden pref a few days,
fill up the hole with a slow polyester selfmixing anchoring cartridge and similar wood
If you want to see the wood and not polyester, use the same wood 45°routed on the front.
Epoxy spray the parts that will be in contact with the resin.
Covering the wood with epoxy spray is because the polyester resin will be soaked up into the wood leaving the filler not to spec.
I use:
http://www.ramset.com.au/Resources/Website/Product/Detail/img714p31.jpg
Make sure everything fits before mucking around with the poly
In the olden days i used old drained motor oil. 30 years on, the cheap pine still looks ugly and smelly but in good shape in the Netherlands
answered Apr 14 at 23:58
PeterPeter
111
New contributor
Peter is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Take as much of the rotten bits out.
Soak/spray 2 or 3 times the inside with an epoxy slow hardening paint,
let it harden pref a few days,
fill up the hole with a slow polyester selfmixing anchoring cartridge and similar wood
If you want to see the wood and not polyester, use the same wood 45°routed on the front.
Epoxy spray the parts that will be in contact with the resin.
Covering the wood with epoxy spray is because the polyester resin will be soaked up into the wood leaving the filler not to spec.
I use:
http://www.ramset.com.au/Resources/Website/Product/Detail/img714p31.jpg
Make sure everything fits before mucking around with the poly
In the olden days i used old drained motor oil. 30 years on, the cheap pine still looks ugly and smelly but in good shape in the Netherlands
answered Apr 14 at 23:58
PeterPeter
111
New contributor
Peter is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Take as much of the rotten bits out.
Soak/spray 2 or 3 times the inside with an epoxy slow hardening paint,
let it harden pref a few days,
fill up the hole with a slow polyester selfmixing anchoring cartridge and similar wood
If you want to see the wood and not polyester, use the same wood 45°routed on the front.
Epoxy spray the parts that will be in contact with the resin.
Covering the wood with epoxy spray is because the polyester resin will be soaked up into the wood leaving the filler not to spec.
I use:
http://www.ramset.com.au/Resources/Website/Product/Detail/img714p31.jpg
Make sure everything fits before mucking around with the poly
In the olden days i used old drained motor oil. 30 years on, the cheap pine still looks ugly and smelly but in good shape in the Netherlands
answered Apr 14 at 23:58
PeterPeter
111
New contributor
Peter is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Take as much of the rotten bits out.
Soak/spray 2 or 3 times the inside with an epoxy slow hardening paint,
let it harden pref a few days,
fill up the hole with a slow polyester selfmixing anchoring cartridge and similar wood
If you want to see the wood and not polyester, use the same wood 45°routed on the front.
Epoxy spray the parts that will be in contact with the resin.
Covering the wood with epoxy spray is because the polyester resin will be soaked up into the wood leaving the filler not to spec.
I use:
http://www.ramset.com.au/Resources/Website/Product/Detail/img714p31.jpg
Make sure everything fits before mucking around with the poly
In the olden days i used old drained motor oil. 30 years on, the cheap pine still looks ugly and smelly but in good shape in the Netherlands
answered Apr 14 at 23:58
PeterPeter
111
New contributor
Peter is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered Apr 14 at 23:58
PeterPeter
111
New contributor
Peter is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered Apr 14 at 23:58
PeterPeter
111
answered Apr 14 at 23:58
PeterPeter
111
111
New contributor
Peter is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Peter is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Peter is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
Thanks for contributing an answer to Home Improvement Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f162061%2fwhat-to-do-with-post-with-dry-rot%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
Hopefully you have checked the other posts (or will) for similar problems...
– Jimmy Fix-it
Apr 14 at 14:10